Contact Us :
Phone : 021-50102151
WA : 0878-5491-3536
CUH SDVC34-XLR Variable Vibratory Feeder Frequency Controller
Automatic constant Feed speed control: Automatic output voltage adjustment in real time to ensure constant preset feed speed regardless of weight change of the workpieces.
Automatic Frequency Adjustment: Automatic output frequency adjustment in real time to make sure the load is always working at its resonant frequency.
Automatic Resonant Frequency Search: Search out and output resonant frequency of the load, Other related parameters are also set automatically.
RS485 Communication: All parameters of the controller can be adjusted via RS485.
Dual Switch Sensor ON/OFF Control: 2 switch sensors or PLCs can be connected to turn on/off the controller.
Automatic Switch Sensor Type Recognition: The controller can recognize and adapt to both PNP and NPN type switch sensors.
Sync Output: Sync output waveform of the slave controller h that of the master controller to the same frequency and phase to avoid beat effect.
Remote Speed Control: Output Voltage/Feed Speed of the controller can be adjusted remotely by an external potentiometer, a PLC, a 1-5V or 4-20mA DC signal.
Digital Overheat Protection: If internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value, the controller will stop its output to protect itself and the load
Restorable short Circuit Protection: If output of the ontroller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown So when there is no short circuit at the output side, the controller will work again after power on.